Bobrick B-2012 Automatic Soap Dispenser 850 ml
€ 181.75
(Par pièce hors TVA)Satisfaction des clients 9.0 / 10
Informations sur le produit Bobrick B-2012 Automatic Soap Dispenser 850 ml
Bobrick B-2012 Automatic Wall-Mounted Soap Dispenser . Automatic wall-mounted liquid soap dispenser stainless steel with satin-finish. Corrosion-resistant valve dispenses a variety of liquid soaps and disinfectants. Valve shall be sensor-activated and not require contact with the dispenser to function. Lockable housing shall be equipped with a clear acrylic refill-indicator window and be hinged for refilling and maintenance. Container shall have a capacity of 850 ml (30-fl oz). Unit shall have CE Certification.
Operation:
To fill the dispenser, remove the lid and fill with liquid hand soap. Dispenses liquid hand soaps of viscosities ranging from
2,000-5,000 cps. After filling soap container, DO NOT TIGHTEN lid. Air flow is necessary inside the container for dispensing.
To activate the dispenser, place hand under spout for approximately one second. Sensing range comes at factory setting of 60mm (2-1/2"). The sensing range set by the factory is recommended for optimal performance. Window indicates when refill is required. The locked, hinged housing opens for re-filling only with special key provided. Requires three (3) Alkaline “C” Cell Batteries, 1.5V (not included). Blue indicator light signals “IN USE”. Flashing blue light signals “LOW BATTERY.” CE Certified
Installation:
Install dispenser at least 200 mm (8") from any projection or horizontal surface which may interfere with the operation of the automatic sensor. Mount the dispenser to the wall by using the enclosed screws and wall plugs. The prepared mounting tape may also be used. Make sure the wall surface is cleaned and in good condition to ensure proper mating of the dispenser to the wall. Install three (3) Alkaline “C” Cell Batteries, 1.5V and replace battery cover. After filling soap container, DO NOT TIGHTEN lid. Air flow is necessary inside the container for dispensing. Remove and discard plastic cap from nozzle tip. Plastic dispensing tube may require massaging to prime the unit. Housing must be closed for dispenser to function.
Caractéristiques techniques
- Marque: Bobrick
- N° d'article: 836B2012
- EAN code: 716954007278
- Série: B-2012
- Matériau: Acier inoxydable
- Finition: Brossé
Documents
CAD / BIM
Il n'y a pas encore d'accessoires pour ce produit
Consommables recommandées
Accessoires et pièces détachées
Plus d'informations sur la livraison de ce produit ?
• nous contacter directement par téléphone au 31(0)318-592930
• ou nous envoyer un e-mail via info@citroenair.eu