ShopProduits

Bobrick B-2012 Automatic Soap Dispenser 850 ml

en stock Nous vendons également des consommables pour ce produit.  Afficher
181.75
(Par pièce hors TVA)
Quantité

Satisfaction des clients 9.2 / 10

Informations sur le produit Bobrick B-2012 Automatic Soap Dispenser 850 ml

Bobrick B-2012 Automatic Wall-Mounted Soap Dispenser . Automatic wall-mounted liquid soap dispenser stainless steel with satin-finish. Corrosion-resistant valve dispenses a variety of liquid soaps and disinfectants. Valve shall be sensor-activated and not require contact with the dispenser to function. Lockable housing shall be equipped with a clear acrylic refill-indicator window and be hinged for refilling and maintenance. Container shall have a capacity of 850 ml (30-fl oz). Unit shall have CE Certification.

Operation:

To fill the dispenser, remove the lid and fill with liquid hand soap. Dispenses liquid hand soaps of viscosities ranging from
2,000-5,000 cps. After filling soap container, DO NOT TIGHTEN lid. Air flow is necessary inside the container for dispensing.
To activate the dispenser, place hand under spout for approximately one second. Sensing range comes at factory setting of 60mm (2-1/2"). The sensing range set by the factory is recommended for optimal performance. Window indicates when refill is required. The locked, hinged housing opens for re-filling only with special key provided. Requires three (3) Alkaline “C” Cell Batteries, 1.5V (not included). Blue indicator light signals “IN USE”. Flashing blue light signals “LOW BATTERY.” CE Certified

Installation:

Install dispenser at least 200 mm (8") from any projection or horizontal surface which may interfere with the operation of the automatic sensor. Mount the dispenser to the wall by using the enclosed screws and wall plugs. The prepared mounting tape may also be used. Make sure the wall surface is cleaned and in good condition to ensure proper mating of the dispenser to the wall. Install three (3) Alkaline “C” Cell Batteries, 1.5V and replace battery cover. After filling soap container, DO NOT TIGHTEN lid. Air flow is necessary inside the container for dispensing. Remove and discard plastic cap from nozzle tip. Plastic dispensing tube may require massaging to prime the unit. Housing must be closed for dispenser to function.

Caractéristiques techniques

  • Marque: Bobrick
  • N° d'article: 836B2012
  • EAN code: 716954007278
  • Série: B-2012
  • Matériau: Acier inoxydable
  • Finition: Brossé

Documents

Brochure

B-201 installations instructions EU

Brochure

B-2012 Datasheet EU

Brochure

Bobrick Stainless Steel Maintenance EU

CAD / BIM

Consommables recommandées

SPECTRO A004037 ECOLABEL Savon pour les Mains 2x5 l
31,00
27,90 (par boîte excl. BTW)
en stock
SPECTRO A004038 ECOLABEL Savon pour les Mains Daux 2x5L
30,30
27,27 (par boîte excl. BTW)
en stock
SPECTRO A004041 Savon pour les Mains+ 2x5 L
43,70
39,33 (par boîte excl. BTW)
en stock
 ALL-CARE Savon pour les mains Boîte de 2x5 litres
 
17,86 (par boîte hors TVA)
en stock

Accessoires et pièces détachées

Bobrick 2012-18-S Cylindrical Valve (Silicone Tube) B-2012
 
15,44 (Par pièce hors TVA)
en stock
Bobrick 2012-30 Bottle replacement kit
 
17,29 (Par pièce hors TVA)
en stock